100% Secure Payments
Tender Details
- Country: Ethiopia
- Summary: Supply, Transportation, Installation and Commissioning of Solar powered Submersible Pump
- ETT Ref No: 57803037
- Deadline: 07 Oct 2021
- Competition: ICB
- Financier:
- Purchaser Ownership: -
- Tender Value: Refer Document
- Notice Type: Tender
- Document Ref. No.: ETH 1145-09/2021
- Purchaser's Detail :
- Description :
- Supply, Transportation, Installation and Commissioning of Solar powered Submersible Pump 1 Monocrystalline PV generator system (Solar module) to supply the required power, including required size of cable. The PV to be installed adjacent to the Borehole. Ls 1 2 Class-B, 2 1/2" Galvanized steel structure for ground mounting/ panel support with aluminium module clamps) with all required accessories. The height above the ground should not be less than 1.5m. Ls 1 3 Submersible water pump with all required accessories including RSI, sensors, check valve, housing for control equipment, etc… Nr. 1 4 2 1/2” Class-C riser pipe with all required fittings m 240 5 2 1/2” water meter with its appropriate fittings Nr. 1 6 Air release valve with its appropriate fittings Nr. 1 Source type Deep well Deep well Deep well Pumping destination Reservoir Reservoir Reservoir Well yield 7.5 L/sec 13 L/sec 0.85 L/sec Location (Woreda) Dubti Dubti Dubti 7 Demolishing and reconstructing of well head Reconstruction of the well head should not cause any contamination of the water. Ls 1 8 Connecting the system with the existing 90mm HDPE pipe using appropriate connectors. Ls 1 9 Fence Work all round the PV generator system (Solar module) 9.1 Fence made of 40mmx40mmx3mm angle iron erected @ 2m interval, well anchored with C-25 concrete to a depth of not less than 0.5m below ground level; the height should not be less than 3m above the ground. The angle iron shall be painted with antirust in two coats. Metal chain link having diameter of 3mm shall be use as a protection. All the angle irons @ the corner shall be strengthened with 2" class-B GS pipe arch. m 100 9.2 Door for the PV compound shall have size of 70cm width by 200 cm height and be painted with 2 coats antirust and 2 coats of blue synthetic paint; shall be fabricated from 0.8mm thick corrugated iron sheet and 1.25 thick LTZ iron frame and shall be provided with standard padlock at the external side. The cost includes installation, and all finishing works. Nr. 1 Well Location (WGS84 map datum) 11.781881o N Latitude 11.846510o N Latitude 11.824210o N Latitude 40.502459o E Longitude 40.837310o E Longitude 40.634895o E Longitude Estimated distance from Semera Town 120Km 30Km 140Km Required daily output: (minimum month) 116m3 230m3 30m3 Type of pipe material and size (riser pipe) GS pipe; 237m; 2 1/2” GS pipe; 150m; 2 1/2” GS pipe; 220m; 2” Type of pipe material and size (pressure main) HDPE; OD: 90mm; 1.25 Km HDPE; OD: 90mm; 575m HDPE; OD: 63mm; 70m Static head (elevation difference between dynamic water level in the well and reservoir inlet) 177m 106m 226m Pump position 237m 150m 220m Well depth 350m 197m 230m Type and size of well casing Steel; 8” Steel; 8” Steel; 8” Water temperature 48 Co 32 Co 41.2 Co Quotations must be uploaded online through the following web tendering portal not later than the 6th of October 2021, 3:00 PM that is accessible through the following link: https://eu.eu-supply.com/ctm/supplier/publictende The deadline for the Submission of Bid: [ October 7, 2021, at 3:00 PM]. The deadline for submission of inquiries/questions: [October 4, 2021, at 3:00PM)
- Documents :
Purchaser : WELTHUNGERHILFE
Addis Ababa
If you are registered member, kindly login to view full details of this tender notice:
CLICK HERE TO LOGIN
